Abrasive Type 27 Flap Disc / Aluminum Oxide Angle Grinder Sanding
Discs
Quick Detail:
WEEM 2504-01 4" x 7/8" Aluminum Oxide Flap Discs Type 27 are
Aluminum Oxide Flap Disc contains a fiberglass backing plate, and
can be used on all types of material from metal to wood. Flat or
beveled
Description:
The Flap Disc is a revolutionary hybrid coated abrasive product
that combines the stock removal capabilities of a depressed center
wheel with the surface finishing characteristics of a resin fiber
disc. The result is an abrasive tool that can perform the functions
of grinding and finishing simultaneously.
A series of flaps made of abrasive cloth are attached to a
semi-rigid fiberglass backing in a fan-like arrangement. As the
flaps gradually wear during use, there is a continual supply of
"new" grains exposed from the under layers.
Flap discs both grind and finish in one step. Therefore, the
traditional two steps process of using a grinding wheel and resin
fiver discs is made obsolete. Always go one level coarser with a
flap disc as opposed to a resin fiber disc. WEEM 2504-01 4" x 7/8" (100mm x 22mm) Aluminum Oxide Flap Discs are sharp Aluminum Oxide
gain for universal metal working, especially surface grinding, and
for heavy stock removal to finishing sanding.
Type 27: use for grinding flat surfaces. Most efficient when used
at angle 0°~15°
Specifications:
MID: | 2504-01 |
Type: | Flap Discs Type 27 |
Size: | 4” (100mm) |
Bond: | Resin over resin |
Grain: | Aluminum Oxide |
Grit: | P40~P320 |
Bore: | 7/8" (22mm) |
Applications:
Weld blending, Grinding, Deburring, Surface finishing and blending,
Edge Chamfering, Stock Removal; High-alloy, stainless, and
heat-treated steel; high-tensile, non-ferrous metals.
Competitive Advantage:
- Grinding and finishing of welds
- Deburring, rust removal and snagging
- Suitable for most ferrous & non-ferrous materials
- Excellent for surface finishing
